Table of Contents
Advertisement
Figure 118 Advanced Application > Broadcast Storm Control
The following table describes the labels in this screen.
Table 73 Advanced Application > Broadcast Storm Control
LABEL
DESCRIPTION
Active
Select this check box to enable traffic storm control on the Switch. Clear this check box to
disable this feature.
Port
This field displays the port number.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Broadcast (pkt/s)
Select this option and specify how many broadcast packets the port receives per second.
Multicast (pkt/s)
Select this option and specify how many multicast packets the port receives per second.
DLF (pkt/s)
Select this option and specify how many destination lookup failure (DLF) packets the port
receives per second.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to reset the fields.
Chapter 15 Broadcast Storm Control
XMG1930 Series User's Guide
165
Advertisement
Table of Contents
Troubleshooting
