ZyXEL Communications XMG1930 Series User Manual page 54

Figure 33 ZON Utility Screen
Select a device and then use the icons to perform actions. Some functions may not be available for
6
your devices.
Note: You must know the selected device admin password before taking actions on the
device using the ZON Utility icons.
Figure 34 Password Prompt
The following table describes the icons numbered from left to right in the ZON Utility screen.
Table 9 ZON Utility Icons
ICON
1 IP Configuration
2 Renew IP Address
3 Reboot Device
4 Reset Configuration to
Default
5 Locator LED
6 Web GUI
7 Firmware Upgrade
8 Change Password
Chapter 4 Web Configurator
DESCRIPTION
Change the selected device's IP address.
Update a DHCP-assigned dynamic IP address.
Use this icon to restart the selected devices. This may be useful when troubleshooting
or upgrading new firmware.
Use this icon to reload the factory-default configuration file. This means that you will
lose all previous configurations.
Use this icon to locate the selected device by causing its Locator LED to blink.
Use this to access the selected device Web Configurator from your browser. You will
need a user name and password to log in.
Use this icon to upgrade new firmware to selected devices of the same model. Make
sure you have downloaded the firmware from the Zyxel website to your computer and
unzipped it in advance.
Use this icon to change the admin password of the selected device. You must know
the current admin password before changing to a new one.
XMG1930 Series User's Guide
54