ZyXEL Communications XMG1930 Series User Manual page 134

Figure 97 Advanced Application > VLAN > VLAN Configuration > Vendor ID Based VLAN Setup
The following table describes the fields in the above screen.
Table 57 Advanced Application > VLAN > VLAN Configuration > Vendor ID Based VLAN Setup
LABEL DESCRIPTION
Name Enter a name up to 32 alphanumeric characters excluding [ ? ], [ | ], [ ' ], or [ " ] for the
vendor ID based VLAN entry.
MAC Address Enter a MAC address that is bind to the vendor ID-based VLAN entry. This is the source MAC
address of the data packet that is looked up when untagged packets arrive at the Switch.
Mask Enter the mask for the specified source MAC address to determine which bits a packet's
MAC address should match.
Enter "f" for each bit of the specified MAC address that the traffic's MAC address should
match. Enter "0" for the bits of the matched traffic's MAC address, which can be of any
hexadecimal characters. For example, if you set the MAC address to 00:13:49:00:00:00 and
the mask to ff:ff:ff:00:00:00, a packet with a MAC address of 00:13:49:12:34:56 matches this
criteria.
VLAN Enter an ID (from 1 to 4094) for the VLAN that is associated with the vendor ID based VLAN
entry.
Priority Select the priority level that the Switch assigns to frames belonging to this VLAN. The higher
the numeric value you assign, the higher the priority for this vendor ID based VLAN entry.
Weight Enter a number between 0 and 255 to specify the rule's weight. This is to decide the priority
in which the rule is applied. The higher the number, the higher the rule's priority.
Add Click Add to save the new vendor ID based VLAN entry.
Cancel Click Cancel to clear the fields in the vendor ID based VLAN entry.
Index This field displays the index number of the vendor ID based VLAN entry.
Name This field displays the name of the vendor ID based VLAN entry.
MAC Address This field displays the source MAC address that is bind to the vendor ID based VLAN entry.
Mask This field displays the mask for the source MAC address that is bind to the vendor ID based
VLAN entry.
VLAN This field displays the VLAN ID of the vendor ID based VLAN entry.
Priority This field displays the priority level which is assigned to frames belonging to this vendor ID
based VLAN.
Weight This field displays the weight of the vendor ID based VLAN entry.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Chapter 9 VLAN
XMG1930 Series User's Guide
134