Error Disable Settings; Error-Disable Status - ZyXEL Communications GS1350 Series User Manual

25.2 Erro r Disa b le Se tting s
Use this screen to go to the screens where you can configure error disable related settings. Click
Adva nc e d Applic a tio n
Fig ure 146
The following table describes the labels in this screen.
Table 88 Advanced Application > Errdisable
L ABEL
Errdisable Status
CPU protection
Errdisable Detect
Errdisable Recovery
25.3 Erro r- Disa b le Sta tus
Use this screen to view whether the Switch detected that control packets exceeded the rate limit
configured for a port or a port is disabled according to the feature requirements and what action you
configure, and related information. Click the
Applic a tio n
Chapter 25 Error Disable
> in the navigation panel to open the following screen.
Errdisa b le
Advanced Application > Errdisable
DESC RIPT IO N
Click this link to view whether the Switch detected that control packets exceeded the rate
limit configured for a port or a port is disabled according to the feature requirements and
what action you configure, and related information.
Click this link to limit the maximum number of control packets (ARP, BPDU and/or IGMP)
that the Switch can receive or transmit on a port.
Click this link to have the Switch detect whether the control packets exceed the rate limit
configured for a port and configure the action to take once the limit is exceeded.
Click this link to set the Switch to automatically undo an action after the error is gone.
> screen to display the screen as shown.
Errdisa b le
GS1350 Series User's Guide
link next to
C lic k he re
200
in the
Errdisa b le Sta tus Adva nc e d