Classifier Configuration - ZyXEL Communications XMG1930 Series User Manual

the rules.
Click Advanced Application > Classifier in the navigation panel to display the configuration screen as
shown.
Figure 134 Advanced Application > Classifier > Classifier Status
The following table describes the labels in this screen.
Table 85 Advanced Application > Classifier > Classifier Status
LABEL
Index
Active
Weight
Name
Match Count
Rule
Any
Classifier
Clear

21.3 Classifier Configuration

Use the Classifier Configuration screen to define the classifiers. After you define the classifier, you can
specify actions (or policy) to act upon the traffic that matches the rules.
In the Classifier Status screen click Classifier Configuration to display the configuration screen as shown.
Chapter 21 Classifier
DESCRIPTION
This field displays the index number of the rule. Click an index number to edit the rule.
This field displays Yes when the rule is activated and No when it is deactivated.
This field displays the rule's weight. This is to indicate a rule's priority when the match order is set
to manual in the Classifier > Classifier Configuration > Classifier Global Setting screen.
The higher the number, the higher the rule's priority.
This field displays the descriptive name for this rule. This is for identification purpose only.
This field displays the number of times a rule is applied. It displays '–' if the rule does not have
count enabled.
This field displays a summary of the classifier rule's settings.
Select Any, then click Clear to clear the matched count for all classifiers.
Select Classifier, enter a classifier rule name and then click Clear to erase the recorded
statistical information for that classifier, or select Any to clear statistics for all classifiers.
Click Clear to erase the recorded statistical information for the classifier.
XMG1930 Series User's Guide
190