ZyXEL Communications XMG1930 Series User Manual page 387

Unspecified Address
An unspecified address (0:0:0:0:0:0:0:0 or ::) is used as the source address when a device does not have
its own address. It is similar to "0.0.0.0" in IPv4.
Loopback Address
A loopback address (0:0:0:0:0:0:0:1 or ::1) allows a host to send packets to itself. It is similar to "127.0.0.1"
in IPv4.
Multicast Address
In IPv6, multicast addresses provide the same functionality as IPv4 broadcast addresses. Broadcasting is
not supported in IPv6. A multicast address allows a host to send packets to all hosts in a multicast group.
Multicast scope allows you to determine the size of the multicast group. A multicast address has a
predefined prefix of ff00::/8. The following table describes some of the predefined multicast addresses.
Table 198 Predefined Multicast Address
MULTICAST ADDRESS
FF01:0:0:0:0:0:0:1
FF01:0:0:0:0:0:0:2
FF02:0:0:0:0:0:0:1
FF02:0:0:0:0:0:0:2
FF05:0:0:0:0:0:0:2
FF05:0:0:0:0:0:1:3
The following table describes the multicast addresses which are reserved and cannot be assigned to a
multicast group.
Table 199 Reserved Multicast Address
MULTICAST ADDRESS
FF00:0:0:0:0:0:0:0
FF01:0:0:0:0:0:0:0
FF02:0:0:0:0:0:0:0
FF03:0:0:0:0:0:0:0
FF04:0:0:0:0:0:0:0
FF05:0:0:0:0:0:0:0
FF06:0:0:0:0:0:0:0
FF07:0:0:0:0:0:0:0
FF08:0:0:0:0:0:0:0
FF09:0:0:0:0:0:0:0
FF0A:0:0:0:0:0:0:0
FF0B:0:0:0:0:0:0:0
FF0C:0:0:0:0:0:0:0
FF0D:0:0:0:0:0:0:0
FF0E:0:0:0:0:0:0:0
FF0F:0:0:0:0:0:0:0
Appendix C IPv6
DESCRIPTION
All hosts on a local node.
All routers on a local node.
All hosts on a local connected link.
All routers on a local connected link.
All routers on a local site.
All DHCP severs on a local site.
XMG1930 Series User's Guide
387