Table of Contents
Advertisement
20.1 Time Range Overview
You can set up one-time and recurring schedules for time-oriented features, such as PoE and classifier.
The UAG supports one-time and recurring schedules. One-time schedules are effective only once, while
recurring schedules usually repeat. Both types of schedules are based on the current date and time in
the Switch.
The time range can be configured in two ways – Absolute and Periodic. Absolute is a fixed time range
with a start and end time. Periodic is recurrence of a time range and does not have an end time.
20.1.1 What You Can Do
Use the Time Range screen
20.2 Configuring Time Range
Click Advanced Application > Time Range in the navigation panel to display the screen as shown.
Figure 133 Advanced Application > Time Range
Chapter 20 Time Range
(Section 20.2 on page
187) to view or define a schedule on the Switch.
XMG1930 Series User's Guide
187
C
H A P T E R
Time Range
20
Advertisement
Table of Contents
Troubleshooting
