Port Details - ZyXEL Communications XMG1930 Series User Manual

Table 191 Management > Port Status (continued)
LABEL
PD
LACP
TxPkts
RxPkts
Errors
Tx kB/s
Rx kB/s
Up Time
Clear Counter

50.2.1 Port Details

Click a number in the Port column in the Port Status screen to display individual port statistics. Use this
screen to check status and detailed performance data about an individual port on the Switch.
Chapter 50 Port Status
DESCRIPTION
For PoE models only.
This field displays whether or not a powered device (PD) is allowed to receive power from the
Switch on this port.
This fields displays whether LACP (Link Aggregation Control Protocol) has been enabled on the
port.
This field shows the number of transmitted frames on this port.
This field shows the number of received frames on this port.
This field shows the number of received errors on this port.
This field shows the number of kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
This field shows the total amount of time in hours, minutes and seconds the port has been up.
Select Port, enter a port number and then click Clear Counter to erase the recorded statistical
information for that port, or select Any to clear statistics for all ports.
XMG1930 Series User's Guide
366