Fitting A Child Seat Using The Seat Belt - Seat Mii Electric Owner's Manual

Fitting a child seat using the seat belt

If you want to fit a universal approval catego-
ry (U) child seat in your vehicle, you must
check that the seat is approved for your vehi-
Age group
Group 0
Group 0+
Rear-facing
Group 1
Forward-facing
Group 2
Group 3
U: universal.
X: vehicle seat unsuitable for fitting a child seat from this group.
Fitting a child seat using the seat belt
Set the height of the seat belt such that it
●
adapts to the child seat naturally, without
twisting. The lowest position of the seat belt
height regulator must be used with rear-fac-
ing child seats.
Put the seat belt in place and pass it
●
through the child seat according to the in-
structions of the child seat manufacturer.
Make sure that the seat belt is not twisted.
●
34
Safety
cle. You will find any necessary information
on the child seat's orange ECE approval la-
Weight of the child
Front passenger air-
bag activated
Up to 10 kg
Up to 13 kg
From 9 to 18 kg
From 9 to 18 kg
From 15 to 25 kg
From 22 to 36 kg
Insert the latch plate into the seat's buckle
●
until you hear the engagement click.
WARNING
When travelling, children must be secured
in the vehicle with a restraint system suita-
ble for age, weight and size.
Read and always observe information
●
and warnings concerning the use of child
›››
seats page 29.
bel. The following table shows the different
fitting options.
Front passenger seat
Front passenger air-
bag deactivated
X U
X U
X U
U X
U X
U X
Rear seats
U
U
U
U
U
U