Cmd_Get_Req; Example 1 - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
Start signal
0x02
Setting was set successfully.

7.4.2. CMD_GET_REQ

This command can be used to query individual setting parameters in flash. The respective
parameters are accessed by means of the corresponding settings index, which can be found
in Table 76 .
Parameters of 2 or more Bytes have to be transferred with the LSB first unless noted differently
in the corresponding description.
Read access to the memory area outside the setting is blocked.
Format:
Start signal
0x02
Response ( CMD_GET_CNF ):
Start signal Command | 0x40
0x02
Status:
0x00: Request received, read out of setting successful
0x01: Operation failed
0xFF: Operation not permitted

7.4.2.1. Example 1

Request the current static pass key RF_StaticPasskey .
Start signal
0x02
Response: The current RF_StaticPasskey in flash is "123123" (0x31 0x32 0x33 0x31 0x32
0x33).
Start signal
0x02
Setting was read successfully.
Order code 2611011024000
Version 1.8 , July 2022
Command | 0x40
0x51
Command
0x10 0x01 0x00
Length
0x50 2 Bytes
Command
0x10
Command | 0x40
0x50 0x07 0x00
Length Status
0x01 0x00 0x00
Length Settings index
1 Byte
Status Parameter
1 Byte (Length - 1) Bytes
Length Settings index
0x01 0x00 0x12
Length Status
0x31 0x32 0x33
0x00
0x31 0x32 0x33
CS
0x52
CS
1 Byte
CS
1 Byte
CS
0x01
CS
Parameter
0x55
www.we-online.com/wcs
83