Cmd_Beacon_Rsp - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
the sending device are output. Both, the RSSI value and the TX power are in two's complement
notation.
The accuracy is ± 2 dB when inside the RSSI range of -90 to -20 dBm.
The value of the parameter TX power is read from the content of the received advertise packet.
Format:
Start signal
0x02

7.1.5. CMD_BEACON_RSP

This telegram indicates the reception of an advertising packet. This data can only be re-
ceived, when the module is in ACTION_SCANNING mode and the corresponding value in the
RF_BeaconFlags is set. If active scanning is enabled by setting the RF_ScanFlags , received
scan response packets are output in addition.
Besides the FS_BTMAC , the RSSI value of the advertising packet and the raw data is output.
The accuracy is ± 2 dB when inside the RSSI range of -90 to -20 dBm.
The format of the raw advertising data is described in the Bluetooth
cation version 5.1 | Vol 3, Part C, section "Advertising and scan response data
format".
Format:
Start signal Command
0x02 0xCC
Order code 2611011024000
Version 1.8 , July 2022
Command Length
0x8B 2 Bytes
Length BTMAC
2 Bytes 6 Byte
BTMAC RSSI TX Power
6 Byte 1 Byte 1 Byte
RSSI Raw advertising data
1 Byte (Length - 7) Bytes
CS
1 Byte
®
specifi-
CS
1 Byte
www.we-online.com/wcs
68