Dis_Modelnumber: Configure The Model Number; Example 1; Example 2 - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
8.26. DIS_ModelNumber: Configure the model number
Settings
Designation
index
DIS_ModelNumber
21
The user setting DIS_ModelNumber specifies the content of the model number field of the Device
Information Service. The permissible characters are in the range of 0x20 - 0x7E which are
special characters (see ASCII table), alphabetic characters (a-z and A-Z), numbers (0-9) and
whitespace.
To add the content of the DIS_ModelNumber to the DIS profile, please set the
corresponding Bit in the DIS_Flags .

8.26.1. Example 1

Set the model number to "Model1" using CMD_SET_REQ with settings index 21
Start signal Command
0x02 0x11
Response CMD_SET_CNF : Successfully modified the setting.
Start signal
0x02

8.26.2. Example 2

Request the model number of the DIS profile using CMD_GET_REQ :
Start signal
0x02
Response CMD_GET_CNF : Successfully read out the value "Default".
Order code 2611011024000
Version 1.8 , July 2022
Permissible
values
See
description
Length Settings index
0x07 0x00 0x15
Command | 0x40
0x51
Command Length
0x10 0x01 0x00
Permissions
Default value
"Default" read/write
Parameter
0x4D 0x6F 0x64 0x65
0x6C 0x31
Length Status
0x01 0x00 0x00
Settings index
0x15
www.we-online.com/wcs
Number
of
Bytes
1-64
CS
0x7F
CS
0x52
CS
0x06
161