Cmd_Disconnect_Ind; Cmd_Phyupdate_Req - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
Start signal
0x02
Status:
0x00: Request received, try to disconnect
0x01: Operation failed
0xFF: Operation not permitted

7.2.6. CMD_DISCONNECT_IND

This telegram indicates that the connection has shut down successfully. This indication mes-
sage is the result of a disconnection request ( CMD_DISCONNECT_REQ ).
Format:
Start signal
Reason:
0x08: Connection timeout
0x13: User terminated connection
0x16: Host terminated connection
0x3B: Connection interval unacceptable
0x3D: Connection terminated due to MIC failure (Not able to connect due to bad link quality,
or connection request ignored due to wrong key)
0x3E: Connection setup failed

7.2.7. CMD_PHYUPDATE_REQ

This command allows to update the PHY of the current Bluetooth
the module prints a CMD_PHYUPDATE_CNF it tries to update the PHY. The result is indicated by
CMD_PHYUPDATE_IND message.
Format:
Start signal
PHY:
0x01: 1 MBit PHY
Order code 2611011024000
Version 1.8 , July 2022
Command | 0x40
0x47
Command
0x02 0x87
Command
0x02 0x1A
Length Status
0x01 0x00 1 Byte
Length Reason
0x01 0x00 1 Byte
Length PHY
0x01 0x00 1 Byte
CS
1 Byte
CS
1 Byte
®
LE connection. After
CS
1 Byte
www.we-online.com/wcs
71