Cmd_Gpio_Local_Write_Ind; Example: Gpios Of The Remote Device Have Been Written By Its Local Host - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III

7.7.11. CMD_GPIO_LOCAL_WRITE_IND

This command indicates that the GPIOs of the remote device have been written by its local
host.
Please note that only the GPIOs are part of this message, that have been
updated successfully. Failed attempts of GPIO updates will not be indicated by
this message.
Format:
Start signal
0x02
The Block is of structure as defined in CMD_GPIO_LOCAL_READ_CNF block structure .

7.7.11.1. Example: GPIOs of the remote device have been written by its local host

Start signal Command
0x02
The GPIOs with GPIO_ID 0x01 (GPIO is low) and 0x02 (GPIO is high) of the radio module
have been written by its local host.
Order code 2611011024000
Version 1.8 , July 2022
Command Length
0xA6 2 Bytes
Length
0xA6 0x06 0x00
Block . . . Block
1
x Bytes x Bytes
Block
1
0x02 0x01 0x00 0x02 0x02 0x01
CS
n
1 Byte
Block CS
2
0xA1
www.we-online.com/wcs
115