Example 1; Cmd_Deletebonds_Req - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
Status:
0x00: Request successfully processed
0x01: Operation failed
0xFF: Operation not permitted
If there are too many devices, the response of the CMD_GETBONDS_REQ is split
into several CMD_GETBONDS_CNF messages.

7.2.13.1. Example 1

Request for the bonding data of the devices in database.
Response:
Command
Start signal
| 0x40
0x02
0x4F
Two devices have been bonded before:
• Device 1 (Bond_ID 0x0000) with FS_BTMAC
• Device 2 (Bond_ID 0x0001) with FS_BTMAC

7.2.14. CMD_DELETEBONDS_REQ

This command removes the bonding information of all or single bonded devices. Enter Bond_ID
to remove the bonding data of a certain Bond_ID. To remove all bonding data, choose Length
equals 0 and leave Bond_ID empty.
Format:
Order code 2611011024000
Version 1.8 , July 2022
Bond_ID
2 Bytes
Start signal Command
0x02 0x0F
Length Status
0x12 0x00 0x00
BTMAC
6 Bytes
Length CS
0x00 0x00 0x0D
#Devices
0x00 0x00
0xA7 0xE2 0x87 0xD0
0x02
0x01 0x00
0x00 0xDA 0x18 0x00
0x82 0x5C 0xA7 0xE2 0x87 0xD0
0x01 0x00 0x00 0xDA 0x18 0x00
www.we-online.com/wcs
Payload CS
0x82 0x5C
0x53
0x01 0x00
75