Firmware History - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III

15. Firmware history

Version 1.0.0 "Release"
• First production release.
Version 1.1.0 "Release"
• Improved UART speed.
• Known issues:
– Using 32 byte RF_DeviceName will result in a malfunctioning device. The device
can be recovered by a FOTA (firmware over the air) update.
Version 1.3.0 "Release"
• New user settings RF_SPPServiceUUID , RF_SPPTXUUID , RF_SPPRXUUID . Together with
the user setting RF_SPPBaseUUID the UUIDs of the SPP-like Bluetooth
can be customized.
• New option for user setting RF_AdvertisingFlags to extend the device name in the
advertising packet to 26 bytes.
• GPIO pins have new options:
– B3-B6 support PWM.
– B1-B6 can be configured to default.
– B1-B6 are set to input, in case the radio module is set to sleep mode using the
CMD_SLEEP_REQ .
• New pairing method "Lesc just works" has been added to the user setting RF_
SecFlags .
• New option SECFLAGS_BONDEDCONNECTIONSONLY_ENABLE has been added to the user
setting RF_SecFlags . This option blocks the connection setup of unbonded devices.
• New command CMD_ALLOWUNBONDEDCONNECTIONS_REQ has been added to temporarily
allow a bonding to a new device.
• Known issues:
– None
Version 1.4.0 "Release"
• Updated the user setting RF_ConnectionTiming . The new values better support most
recent Android and iOS devices.
• Updated the user setting CFG_Flags . A new option has been added that defines
whether the Proteus-III closes the Bluetooth
central (i.e. smart phone) does not respect the configured connection interval set-
tings (see RF_ConnectionTiming ).
• Extended the command CMD_GETSTATE_CNF . Additional information has been added
to the command in ACTION_CONNECTED state.
Order code 2611011024000
Version 1.8 , July 2022
®
LE connection in case the connected
www.we-online.com/wcs
®
LE profile
197