Example 1; Cmd_Rssi_Ind - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
If TXPower = 0x80, there is no value available.
If Device name length = 0, then there is no device name available.

7.1.3.1. Example 1

Request for the FS_BTMAC of the devices found during the last scan.
Response:
Command
Start signal
| 0x40
0x02
0x4B
During the last scan two devices have been detected:
• Device 1 with FS_BTMAC
TXPower of 0x04 (=+4 dBm) and device name of length 5 with the value of 0x4D4F442031
("MOD 1").
• Device 2 with FS_BTMAC
27 dBm), TXPower of 0x00 (0 dBm) and device name 0x4D4F442032
length 5.

7.1.4. CMD_RSSI_IND

This telegram indicates the reception of an advertising packet sent by another Proteus-III mod-
ule. It can be used to realize a position sensing application. This data can only be received,
when the module is in ACTION_SCANNING mode (passive scan is sufficient) and the correspond-
ing value in the RF_BeaconFlags is set.
Besides the FS_BTMAC , the RSSI value of the advertising packet and the transmission power of
Order code 2611011024000
Version 1.8 , July 2022
Start signal Command
0x02 0x0B
Length Status
0x1E 0x00 0x00
0x11 0x00 0x00 0xDA 0x18
0x55 0x00 0x00 0xDA 0x18 0x00
Length CS
0x00 0x00 0x09
#Devices
Payload
0x11 0x00 0x00 0xDA
0x18 0x00
0x05 0x4D 0x4F 0x44
0x02
0x20 0x31
0x00 0xDA 0x18 0x00
0xE5 0x00 0x05
0x4F 0x44 0x20 0x32
0x00, RSSI value of 0xE2 (-30 dBm),
and RSSI value of 0xE5 (-
www.we-online.com/wcs
CS
0xE2 0x04
0x11
0x55 0x00
0x4D
("MOD 2") of
67