Dis_Serialnumber: Configure The Serial Number; Example 1; Example 2 - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
8.27. DIS_SerialNumber: Configure the serial number
Settings
Designation
index
DIS_SerialNumber
22
The user setting DIS_SerialNumber specifies the content of the serial number field of the De-
vice Information Service. The permissible characters are in the range of 0x20 - 0x7E which are
special characters (see ASCII table), alphabetic characters (a-z and A-Z), numbers (0-9) and
whitespace.
To add the content of the DIS_SerialNumber to the DIS profile, please set the
corresponding Bit in the DIS_Flags .

8.27.1. Example 1

Set the serial number to "1.2.3" using CMD_SET_REQ with settings index 22
Start signal Command
0x02 0x11
Response CMD_SET_CNF : Successfully modified the setting.
Start signal
0x02

8.27.2. Example 2

Request the serial number of the DIS profile using CMD_GET_REQ :
Start signal
0x02
Response CMD_GET_CNF : Successfully read out the value "Default".
Order code 2611011024000
Version 1.8 , July 2022
Permissible
values
See
description
Length Settings index
0x06 0x00 0x16
Command | 0x40
0x51
Command Length
0x10 0x01 0x00
Permissions
Default value
"Default" read/write
Parameter
0x31 0x2E 0x32 0x2E
0x33
Length Status
0x01 0x00 0x00
Settings index
0x16
www.we-online.com/wcs
Number
of
Bytes
1-64
CS
0x33
CS
0x52
CS
0x05
163