We PROTEUS-III User Manual page 28

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
3
B1 P0.09/NFC1
3
B2 P0.10/NFC2
B3 P0.23
B4 P1.00
B5 P0.21
B6 P0.07
1
Internal pull ups or pull downs are configured at start-up by the firmware installed in the SoC. The pull up on
the /RESET pin cannot be disabled by firmware.
2
Pins available to connect an external crystal in custom firmware. The standard firmware of Proteus-III does not
implement this function.
3
NFC pins available for NFC function in custom firmware. The standard firmware of Proteus-III does not imple-
ment this function.
Order code 2611011024000
Version 1.8 , July 2022
Pin for remote GPIO access. Do not connect, if
B1 GPIO
not needed.
Pin for remote GPIO access. Do not connect, if
B2 GPIO
not needed.
Pin for remote GPIO access. Do not connect, if
B3 GPIO
not needed.
Pin for remote GPIO access. Do not connect, if
B4 GPIO
not needed.
Pin for remote GPIO access. Do not connect, if
B5 GPIO
not needed.
Pin for remote GPIO access. Do not connect, if
B6 GPIO
not needed.
Table 11: Pinout
www.we-online.com/wcs
26