Telec Radio Law Approval; Label; Certified Antennas - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III

23.9. TELEC radio law approval

ID-Code
(Interference
provision)

23.9.1. Label

Due to the size of the Proteus-III label, the certification label of the Proteus-III is not placed
onto the module label.
2611011024000:
After integration of the Proteus-III in the end device, the corresponding certifi-
cation label must be recognized from the outside. Otherwise this information
must be referenced on the housing as well as in the user manual. E labeling is
allowed.
23.9.2. Certified antennas
The Proteus-III is pre-certified with the following antennas.
Product
Proteus-III (2611011024000)
1
Additional, not yet certified, antennas must be re-certified without retesting. Only antenna gain and antenna
characteristic diagrams must be specified. Please contact your local field sales engineer (FSE) to get support
in certifying your own antenna.
Order code 2611011024000
Version 1.8 , July 2022
Japanese Radio Law Compliance
This device has passed the Radio Law approval for Japan through the
registered certification body TELEC. The corresponding ARIB
(Association of Radio Industries and Businesses) standard has been
applied. Accordingly, the market approval is given by the MIC
(Ministry of Internal Affairs and Communications).
This device should not be modified (otherwise the granted
designation number will become invalid)
The MAC address of the radio device maintains the format
00:18:DA:xx:xx:xx. The latter part xx:xx:xx of the MAC address
coincides with the serial number of the device.
R 201-190950
Certified antenna
PCB antenna included in the Proteus-III
229
www.we-online.com/wcs