Bonding - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
Response CMD_DATA_CNF : Request received,
send data now
Indication CMD_DATA_IND : Received string
"ABCD" from FS_BTMAC
0x18 0x00 with RSSI of 0xCA (-54 dBm)
Response CMD_TXCOMPLETE_RSP : Data
transmitted successfully
6. Reply with "EFGH" to module B.
Info
Request CMD_DATA_REQ : Send "EFGH" to
module B
Response CMD_DATA_CNF : Request received,
send data now
Indication CMD_DATA_IND : Received string
"EFGH" from FS_BTMAC
0x18 0x00 with RSSI of 0xC1 (-63dBm)
Response CMD_TXCOMPLETE_RSP : Data
transmitted successfully
7. Now module A closes the connection, so both modules will get a disconnect indication.
Info
Request CMD_DISCONNECT_REQ : Disconnect
Response CMD_DISCONNECT_CNF : Request
received, disconnect now
Indication CMD_DISCONNECT_IND : Connection
closed
Indication CMD_DISCONNECT_IND : Connection
closed
8. You may want to perform a CMD_FACTORYRESET_REQ to restore default settings.

5.6.1.5. Bonding

The SECFLAGS_BONDING_ENABLE flag in the RF_SecFlags user setting allows enabling the bond-
ing feature. This feature stores the keys that are exchanged during the pairing phase in a
connection setup. With this, subsequent connections to bonded devices can be established
without renegotiation. Bonding data of up to 32 devices will be stored in the flash.
The commands CMD_GETBONDS_REQ and CMD_DELETEBONDS_REQ allow to display and remove cer-
tain or all entries of the list of bonded devices.
Order code 2611011024000
Version 1.8 , July 2022
0x11 0x00 0x00 0xDA
0x55 0x00 0x00 0xDA
02 84 0B 00 11 00
00 DA 18 00 CA 41
42 43 44 90
Module A
02 04 04 00 45 46 47
48 0E
02 44 01 00 00 47
02 C4 01 00 00 C7
Module A
02 07 00 00 05
02 47 01 00 00 44
02 87 01 00 16 92
www.we-online.com/wcs
02 44 01 00 00 47
02 C4 01 00 00 C7
Module B
02 84 0B 00 55 00
00 DA 18 00 C1 45
46 47 48 D7
Module B
02 87 01 00 13 97
50