Cmd_Security_Ind; Cmd_Channelopen_Rsp; Cmd_Disconnect_Req - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III

7.2.3. CMD_SECURITY_IND

This telegram indicates the security status and the FS_BTMAC of the connected device. This
indication message is the result of a connection request ( CMD_CONNECT_REQ ).
Format:
Start signal
0x02
Status:
0x00: Encrypted link to previously bonded device established
0x01: Bonding successful, encrypted link established
0x02: No bonding, pairing successful, encrypted link established

7.2.4. CMD_CHANNELOPEN_RSP

This command is sent to the host as soon as connection setup and service discovery has
been completed successfully. Now data can be transmitted using the CMD_DATA_REQ . Next to
the FS_BTMAC of the connected device, the maximum payload size that is supported by the
link is part of this telegram. This indication message is the result of a connection request
( CMD_CONNECT_REQ ).
Format:
Start signal Command
0x02
Status:
0x00: Success

7.2.5. CMD_DISCONNECT_REQ

This command shuts down the existing connection. Thereafter the module prints a
CMD_DISCONNECT_CNF to confirm that the request has been received, the indication message
CMD_DISCONNECT_IND follows which determines whether the disconnection operation has been
performed successfully or not.
Format:
Response ( CMD_DISCONNECT_CNF ):
Order code 2611011024000
Version 1.8 , July 2022
Command Length
0x88 0x07 0x00
Length
0xC6 0x08 0x00
Start signal Command
0x02 0x07
Status BTMAC
1 Byte 6 Bytes
Status BTMAC Max payload
1 Byte 6 Bytes
Length CS
0x00 0x00 0x05
CS
1 Byte
CS
1 Byte 1 Byte
www.we-online.com/wcs
70