WIRELESS CONNECTIVITY & SENSORS
User manual Proteus-III
4.3. Power up
After powering the module the /RESET pin shall be hold for another t of 1ms after the VDD is
stable to ensure a safe start-up. The module will send a CMD_GETSTATE_CNF (0x02 41 02 00 01
01 41) to indicate "ready for operation" after the /RESET pin was released.
Applying a reset (e.g. a host temporarily pulling the /RESET pin down for at
least 1ms and releasing it again) after the VCC is stable will also be sufficient.
Order code 2611011024000
Version 1.8 , July 2022
Figure 7: Power up
www.we-online.com/wcs
30