Usersettings - Module Configuration Values; Fs_Deviceinfo: Read The Chip Type And Os Version; User Manual Proteus-Iii - We PROTEUS-III User Manual

WIRELESS CONNECTIVITY & SENSORS

User manual Proteus-III

8. UserSettings - Module configuration values
The settings described in this chapter are stored permanently in the module's flash memory.
Depending on their corresponding permissions, their current values can be read out by the
CMD_GET_REQ command or modified by the CMD_SET_REQ command. To do so the corresponding
settings index is used, which can be found in the primary table of each setting description.
The validity of the specified parameters is not verified. Incorrect values can
result in device malfunction.
After the modification of the non-volatile parameters, a reset will be necessary
for the changes to be applied.

8.1. FS_DeviceInfo: Read the chip type and OS version

Settings
Designation
index
FS_DeviceInfo
15
This setting contains information about the chip type and the OS version. The value of FS_
DeviceInfo is composed of the following 4 sub parameters (ordered by appearance in the
response):
OS version
OS version:
0x00B6 : Softdevice S140 6.1.1.
0x00C1 : Softdevice S140 7.0.0.
0x00CA : Softdevice S140 7.0.1.
Package variant:
0x2004: QFN - QI
0x2005: WLCSP - CK
Chip ID:
0x00052840: nRF52840
Order code 2611011024000
Version 1.8 , July 2022
Permissible
values
-
Build code
2 Bytes 4 Bytes
Permissions
Default value
-
Package variant Chip ID
2 Bytes 4 Bytes
Number
of Bytes
read
12
121
www.we-online.com/wcs