F3 Main Components - Minelab F3 Operation Manual

2.2

F3 Main Components.

components of the F3 which comprise:
Handle
Middle
Shaft
Lower
Shaft
Coil
Skidplate
a. Sensitivity Endcap – the sensitivity of the F3 can be changed by
using either the Black (maximum) or Red (minimum) Endcaps.
b. Armrest Strap – provided for operator comfort when the F3 is
used for prolonged periods.
c. Armrest – adjustable (via a camlock) to maximise comfort of use
for an operator.
Armrest
Strap
Armrest
Upper
Shaft
Figure 4: F3 – Main Components
Figure 4 identifies the main
Endcap
Camlock
Middle
Camlock
Lower
Camlock
8
Electronics
Pack
Battery
Pack
Upper
P0635-A