1/2.5/5/10Gbps Multi-Gigabit Copper Ports - Allied Telesis x330 Series Installation Manual

1/2.5/5/10Gbps Multi-Gigabit Copper Ports

The x330-10GTX Switch has one Multi-Gigabit copper port. The x330-
20GTX and x330-28GTX Switches have two Multi-Gigabit copper ports.
Table 2 lists the port specifications.
Table 2. Specifications of the 1/2.5/5/10Gbps Multi-Gigabit Copper Ports
Specification
Port Speed
Duplex Mode
Maximum Distance
Connector
Cable Requirements
x330 Series Installation Guide for Standalone Switches
Description
Here are the supported speeds:
- 1Gbps (IEEE802.3ab)
- 2.5Gbps (IEEE 802.3bz)
- 5Gbps (IEEE 802.3bz)
- 10Gbps (IEEE 802.3an)
You can set port speed with Auto-
Negotiation or manually. Guidelines are
given here:
- 1Gbps and 10Gbps can be set either
manually or with Auto-Negotiation.
- 2.5Gbps and 5Gbps must be set with
Auto-Negotiation.
- The default setting is Auto-Negotiation.
Full-duplex only
100 meters (328 feet)
8-pin RJ-45
- 1/2.5/5Gbps - Standard TIA/EIA 568-A-
compliant Category 5 or TIA/EIA 568-B-
compliant Enhanced Category 5 (Cat
5e) unshielded cabling.
- 10Gbps -Standard TIA/EIA 568-C-
compliant Category 6a unshielded
cabling.
25