Figure 10: Switch Id Led With Eco-Friendly Mode On (Port Leds Off) - Allied Telesis x330 Series Installation Manual
Fanless gigabit layer 3 access switches
Hide thumbs
Also See for x330 Series:
- Installation manual (160 pages) ,
- Installation manual (172 pages)
Table of Contents
Advertisement
Chapter 1: Overview
34
Note
The x330-10GTX Switch does not support the VCStack feature. It
operates as a standalone device with the Switch ID "0".
Note
If the Switch ID LED displays "F" for a fault condition, use the SHOW
SYSTEM ENVIRONMENT command in the command line interface
of the AlliedWare Plus management software to identify the source
of the problem.
Figure 10 illustrates the states of the LED when the eco-friendly mode is
on and the port LEDs are off.
The switch is the master switch of a VCStack.
The switch is a standalone unit.
The switch is a member switch of a VCStack.
Figure 10. Switch ID LED with eco-friendly Mode On (Port LEDs Off)
Advertisement
Table of Contents
