Chapter 5: Cabling the Networking Ports
70
3. Position the transceiver.
For a top slot, position the transceiver with the handle on top. For a
bottom slot, position the transceiver with the handle beneath the
module.
4. Slide the transceiver into the slot until it clicks into place. See
Figure 40.
Figure 40. Installing an SFP/SFP+ Transceiver
Note
If you are ready to attach the fiber optic cable to the transceiver,
continue with the next step. Otherwise, repeat Step 1 to Step 4 to
install another SFP transceiver in the switch.
5. Remove the dust cover from the transceiver, as shown in Figure 41.
Figure 41. Removing the Dust Cover from an SFP Transceiver