Right-Hand Area (Rightzo); Physical Left Margin (Physlum) - Tally Dascom LA2810 User Manual

The menu

Right-hand area (Rightzo)

If the parameter is On, the print head travels from the right-hand perforation area
towards the centre of the paper while the paper is moving. The Pagewid option must
be correctly set in this case, see
Leftzon Rightzo
Back Next
1 2 3
Rightzo=Off
Set < > Exit
1 2 3
If this parameter is On, the print head carriage travels to the center of the form while
the paper is loaded.
Confirm your setting with the Set key (1)
Press the Next key (4) to access the next group of parameters.
Physical left margin (Physlm)
Physlm
Back Next
1 2 3
Physlm= 0/10" *
Set < > Exit
1 2 3
Permanent (physical) setting of the left margin. This parameter cannot be changed by emulation-
dependent margin settings. Margin setting values entered by ESC sequences are added to the
Physlm.
Note that this value is subtracted from the maximum printing width of 13.6 inches.
Confirm your setting with the Set key (1)
Press the Next key (4) to access the next group of parameters.
All parameters described in the Paphand group may also be defined via an ESC
sequence (see
70
Online
Select the Rightzo menu (3).
4
Setup
*
Online
Setting options: On/Off
4
Setup
Default setting: Off
Online
Select the Physlm menu (2).
4
Setup
Online
Setting options: 0 to 30 in 1/10 inch steps
4
Setup
Default setting: 0/10 Inch
Emulations or Programmer's Application
Paper width (Pagewid).
Manual).
User Guide