Settings; Setting The Print Head Gap - Tally Dascom LA2810 User Manual

Settings

Settings
This section describes how to set the tear position, the first printing line, the print
head gap as well as the font and the character density.

Setting the print head gap

The printer features automatic print head gap adjustment to the thickness of the
paper used. In setup mode, you can enter a correction value to modify the head
gap determined automatically. This correction is useful for modifying the
appearance of the type face.
The AGA (automatic gap adjustment) function must be set to On. For more
detailed information, refer to the section
Adjust Paperway
Menu Char
1 2 3
TOF
Head Tear
1 2 3
Head= 0
Set < > Exit
1 2 3
Negative values decrease the print head gap, positive values increase it.
Changing the automatically determined value may have a strong effect on the
printing quality.
The setting made will be retained after switching off the printer.
If the printout shows signs of smudging, we recommend that you increase the
print head gap up to +10 (if AGA is on, see
and use a less smooth type of paper.
32
Press the Setup key. The printer changes to setup mode.
Online
Press the Adjust (2) key.
4
Setup
Press the Head (1) key.
Online
4
Setup
Use the < (2) or > (3) key to set the range within which the
*
automatic gap adjustment is to be corrected. You can select
Online
values in the range from -10 to +10.
4
Setup
Confirm the input by pressing the Set (1) key.
Press the Setup key. The printer returns to the initial status.
Automatic gap adjustment
Automatic gap adjustment
User Guide
(AGA).
(AGA))