Switching On The Printer - Tally Dascom LA2810 User Manual

User Guide

Switching on the printer

SDRAMTEST
20000 55AA ok
1 2 3 4
70548
Initializing ...
After switching on, the printer passes through a memory test
Online
during the initialization phase. In the display appears temporary
the message "SDRAMTEST XXXXX XX ok".
Setup
If the memory test is successful finished, the firmware number
appears in the display.
After finishing the initialization the printer switches to online
mode (see
The power switch for switching on the printer is
located at the bottom left at the front of the
printer when viewed from the front.
Online mode).
Installation
9