Automatic Paper Motion Sensor (Pms) - Tally Dascom LA2810 User Manual

The menu

Automatic paper motion sensor (PMS)

You can use this function to activate or deactivate the paper motion detection feature.
When it is active, printing and paper movements stop in case of a paper jam and an
error message is output in the display.
Paphand CX-Bid
Back Next
1 2 3 4
PMS=Low
Set < > Exit
1 2 3 4
PMS=Low/Mid/High: The form movements of the active paper path are monitored. In case of a paper
jam, printing and paper movements stop and an error message (paper jam) is displayed.
You can use this function to activate or deactivate the paper motion detection feature. When it is active,
printing and paper movements stop in case of a paper jam and an error message is output in the
display.
Low: Sensitivity 800/360"
Mid: Sensitivity 600/360"
High: Sensitivity 300/360"
PMS=Off: A paper jam will not produce an error message.
The Paper Motion Sensor (PMS) detects any paper jam or unintended paper end
condition and provides efficient protection against any paper transport problems
together with the paper end sensor. This prevents the printer from printing on
jammed paper or printing without paper. Disabling the PMS can affect the operational
reliability of your printer and should therefore be avoided.
Confirm the setting by pressing the Set (1) key.
Change to the next parameter group with the Next key (4).
66
Online
Select the PMS menu (2).
Setup
*
Setting options: Off/Low/Mid/High
Online
Default setting: Low
Setup
User Guide