Line Length (Width); Barcode (Barcode) - Tally Dascom LA2810 User Manual

The menu

Line length (Width)

Selects the line length in inches. With the setting of 8 Inch, the printer operates
like a printer with a width of only 8 inches.
Width
Back Next
1 2 3
Width=13.6Inch *
Set < > Exit
1 2 3 4
Confirm the setting by pressing the Set key (1).
Press the Next key (4) to access the next group of parameters.

Barcode (Barcode)

With this function selected it is possible to print different Barcodes and LCP (Large
Character Printing).
Barcode Barmode
Back Next
1 2 3
Barcode=Off
Set < > Exit
1 2 3 4
The definition and activation is performed by special sequences through the interface. Since this
selection is possible for all emulations it must be noted that conflicts in sequence conformity with the
selected emulation may occur. For this reason the barcode function can also be switched on and off by
MTPL sequences. (The possible barcodes, LCP characters and the operation of these functions are
described in the Barcode Programmer's Application
Confirm the setting by pressing the Set key (1).
Press the Next key (4) to access the next group of parameters.
62
Online
Press Width (2) key.
4
Setup
Online
Use the < (2) or > (3) key to select the desired setting.
Setup
Setting Options: 8 Inch, 13.2 Inch, 13.6 Inch
Default Setting: 13.6 Inch
Online
Press Barcode (2) key.
4
Setup
*
Online
Use the < (2) or > (3) key to select the desired setting.
Setup
Setting Options: On/Off
Default Setting: Off
Manual).
User Guide