Paper Specifications - Tally Dascom LA2810 User Manual

Specifications

Paper specifications

Continuous paper
Single part forms
Tractor 1
Continuous paper Multi part
forms
Tractor 1
(to be tested individually)
Sets of forms
Paper quality
120
Weight
Width
Form length
Copies
LA2810
LA2820
Weight of original
Weight of copies
Weight of bottom sheet
Thickness (max.)
Width
Form length
Sets of forms may be used only if the top edge is bound. The binding
edge should be as soft as possible. A wavy binding edge may hamper
the smooth feeding of these sets. Multi-part forms must be loaded with
the bound top edge down. Multi-part forms should be tested for
suitability.
Light pulp paper of medium fine quality, paper bearing the quality mark
SM Post and photocopy paper are suitable for use. Unsuitable are:
satin-finish or coated papers, imitation art papers, and embossed
papers.
Since paper as natural material reacts strongly to environmental
influences (e.g. humidity, temperature), the place of storage should be
selected carefully. We recommend that this kind of paper should be
tested extensively before larger quantities are acquired.
Should papers with a dark reverse side be used, these should also be
tested for their functionality. Please pay attention to the use of infrared
reflecting colors, when acquiring these papers.
2
60 to 120 g/m
76 to 420 mm
76 to 559 mm
1 + 6 max.
1 + 5 max.
2
45 to 65 g/m
2
45 to 56 g/m
2
45 to 65 g/m
0.6 mm
76 to 420 mm
76 to 451 mm
User Guide