Vertical Position After Oversized Barcode (Bartop); Vertical Position After Oversized Character (Lcptop); Automatic Gap Adjustment (Aga); Enable/Disable Paper Handling Feature (Paphand) - Tally Dascom LA2810 User Manual

User Guide

Automatic gap adjustment (AGA)

This function allows you to switch the Automatic Gap Adjustment (AGA) off or on.
PMS AGA
Back Next
1 2 3 4
AGA=On
Set < > Exit
1 2 3 4
AGA=On: printer checks paper thickness and changes gap adjustment if necessary (default).
Measurements take place
– after power-on
– whenever changing the paper path, when loading paper
AGA = Off: selects manual gap adjustment; the value can be set for each paper source and each of
the five menus available.
Confirm the setting by pressing the Set (1) key. The printer automatically leaves
test mode and assumes online mode.
Enable/Disable paper handling features (Paphand)
The Paphand group of menus improves the possibilities for the trouble-free printing of
paper with properties likely to cause problems (perforations etc.) or paper of poor
finish.
Put the printer into Menu mode by pressing the Setup key. Press the Menu key. The
display shows Print/Macro. Press Next or Back key until the parameter group
Paphand/CX-bid appears in the display.
Paphand CX-Bid
Back Next
1 2 3
Online
Select the AGA menu (3).
Setup
*
Setting options: Off/On
Online
Default setting: On
Setup
Online
Select the Paphand menu (2).
4
Setup
The menu
67