Loading Optional Firmware - Tally Dascom LA2810 User Manual

Printer drivers

Loading optional firmware

If you download new firmware as described below, all menu settings except
STOP
the settings for the transmission speed of the Ethernet interface and the IP
address administration will be overwritten. For this reason you should print
a menu dump in or to be able to reestablish the previous settings if necessary
(see
The most current version of the firmware can be downloaded from our
page.
Online Trac1
Tear
1 2 3
▸via
USB (PrintFile)
For doing so you will need an additional application called "Print File" which can be downloaded as
freeware from www.lerup.com/printfile
▸via
Ethernet (WebPanel)
Via Webpanel the according download pages will be available for doing this in a comfortable way.
▸via
Parallel CTX (copy/b) – only if the combi interface is installed.
For doing this please open command prompt under Windows and enter -
"Copy/b x\path\DOWNLOAD.MOT PRN".
18
Printing out menu configurations
Loading the Firmware will be possible via the following ports in
ONLINE Mode:
Online
4
Setup
(Print)).
.
User Guide
internet