Right-Hand Area (Rightzo); Physical Left Margin (Physlm) - Tally Dascom 2810 User Manual

Advanced menu
Advanced menu
Advanced menu
Advanced menu
Advanced menu

Right-hand area (Rightzo)

Right-hand area (Rightzo)
Right-hand area (Rightzo)
Right-hand area (Rightzo)
If the parameter is On, the print head travels from the right-hand perforation area
Right-hand area (Rightzo)
towards the centre of the paper while the paper is moving. The Pagewid option
must be correctly set in this case, see
Leftzon Rightzo
Leftzon Rightzo
Back Next
Back Next
Leftzon Rightzo
1 2 3
Leftzon Rightzo
Back Next
1 2 3
Back Next
1 2 3
1 2 3
Rightzo=Off
Rightzo=Off
Set < > Exit
Set < > Exit
Rightzo=Off
1 2 3
Rightzo=Off
Set < > Exit
1 2 3
Set < > Exit
3
1 2
1 2 3
If this parameter is On, the print head carriage travels to the centre of the
form while the paper is loaded.

Physical left margin (Physlm)

Confirm your setting with the Set key (1) and press the Next key (4) to access
Physical left margin (Physlm)
the next group of parameters.
Physical left margin (Physlm)
Physlm
Physical left margin (Physlm)
Physlm
Physical left margin (Physlm)
Back Next
Back Next
Physlm
1 2 3
Physlm
Back Next
1 2 3
Back Next
1 2 3
1 2 3
Physlm= 0/10" *
Physlm= 0/10" *
Set < > Exit
Set < > Exit
Physlm= 0/10" *
1 2 3
Physlm= 0/10" *
Set < > Exit
1 2 3
Set < > Exit
1 2 3
1 2 3
Permanent (physical) setting of the left margin. This parameter cannot be
changed by emulation-dependent margin settings. Margin setting values entered
by ESC sequences are added to the Physlm.
Note that this value is subtracted from the maximum printing width of 13.6
inches.
Confirm the setting by pressing the Set (1) key.
All parameters described in the Paphand group may also be defined via an
ESC sequence (see
Press the Next key (4) to access the next group of parameters.
106
106
84
106
106
If the parameter is On, the print head travels from the right-hand per-
If the parameter is On, the print head travels from the right-hand per-
foration area towards the centre of the paper while the paper is mo-
foration area towards the centre of the paper while the paper is mo-
ving. The Pagewid option must be correctly set in this case, see
If the parameter is On, the print head travels from the right-hand per-
ving. The Pagewid option must be correctly set in this case, see
If the parameter is On, the print head travels from the right-hand per-
Paper width (Pagewid)
foration area towards the centre of the paper while the paper is mo-
Paper width (Pagewid)
foration area towards the centre of the paper while the paper is mo-
ving. The Pagewid option must be correctly set in this case, see
ving. The Pagewid option must be correctly set in this case, see
Select the Rightzo menu (3).
Paper width (Pagewid)
Select the Rightzo menu (3).
Paper width (Pagewid)
Select the Rightzo menu (3).
Online
Select the Rightzo menu (3).
Online
Select the Rightzo menu (3).
4
Setup
Online
4
Setup
Online
4
Setup
4
Setup
Setting options: On/Off
Setting options: On/Off
Setting options: On/Off
*
Default setting:
*
Default setting:
Online
Default setting: Off
Setting options: On/Off
Online
Setting options: On/Off
*
Default setting:
4
*
Setup
Default setting:
4 Online
Setup
Online
4
Confirm your setting with the Set key (1) and press the Next key (4)
Setup
4
Confirm your setting with the Set key (1) and press the Next key (4)
Setup
to access the next group of parameters.
to access the next group of parameters.
Confirm your setting with the Set key (1) and press the Next key (4)
Confirm your setting with the Set key (1) and press the Next key (4)
to access the next group of parameters.
to access the next group of parameters.
Select the Physlm menu (2).
Select the Physlm menu (2).
Online
Select the Physlm menu (2).
Online
Select the Physlm menu (2).
Select the Physlm menu (2).
4
Setup
Online
4
Setup
Online
4
Setup
4
Setup
Setting options: 0 to 30 in 1/10 inch steps
Setting options: 0 to 30 in 1/10 inch steps
Default setting:
Online Default setting:
Setting options: 0 to 30 in 1/10 inch steps
Online
Setting options: 0 to 30 in 1/10 inch steps
Permanent (physical) setting of the left margin. This parameter can-
Setting options: 0 to 30 in 1/10 inch steps
Default setting:
4 Permanent (physical) setting of the left margin. This parameter can-
not be changed by emulation-dependent margin settings. Margin
Setup
Default setting:
Online
4 Default setting: 0/10 Inch
not be changed by emulation-dependent margin settings. Margin
Setup
Online setting values entered by ESC sequences are added to the Physlm.
Permanent (physical) setting of the left margin. This parameter can-
setting values entered by ESC sequences are added to the Physlm.
Permanent (physical) setting of the left margin. This parameter can-
4
not be changed by emulation-dependent margin settings. Margin
Setup
4
not be changed by emulation-dependent margin settings. Margin
Setup
Note that this value is subtracted from the maximum printing
setting values entered by ESC sequences are added to the Physlm.
Note that this value is subtracted from the maximum printing
setting values entered by ESC sequences are added to the Physlm.
width of 13.6 inches.
width of 13.6 inches.
Note that this value is subtracted from the maximum printing
Confirm the setting by pressing the Set (1) key.
Note that this value is subtracted from the maximum printing
width of 13.6 inches.
Confirm the setting by pressing the Set (1) key.
width of 13.6 inches.
All parameters described in the Paphand group may also be
Confirm the setting by pressing the Set (1) key.
All parameters described in the Paphand group may also be
Confirm the setting by pressing the Set (1) key.
defined via an ESC sequence (see
defined via an ESC sequence (see
Programmer's Application
All parameters described in the Paphand group may also be
Programmer's Application
All parameters described in the Paphand group may also be
defined via an ESC sequence (see
Press the Next key (4) to access the next group of parameters.
defined via an ESC sequence (see
Programmer's Application
Press the Next key (4) to access the next group of parameters.
Programmer's Application
Press the Next key (4) to access the next group of parameters.
Press the Next key (4) to access the next group of parameters.
Paper width
Off
Off
If this parameter is On, the print head carriage travels to
Off
If this parameter is On, the print head carriage travels to
the centre of the form while the paper is loaded.
Off
the centre of the form while the paper is loaded.
If this parameter is On, the print head carriage travels to
If this parameter is On, the print head carriage travels to
the centre of the form while the paper is loaded.
the centre of the form while the paper is loaded.
0/10 Inch
0/10 Inch
0/10 Inch
0/10 Inch
Emulations or Programmer's Application
(page 105).
(page 105).
(Pagewid).
(page 105).
(page 105).
Emulations
Emulations
Manual).
Manual).
Emulations
Emulations
Manual).
Manual).
User guide
User guide
User Guide
User guide
User guide
(page 145) or
(page 145) or
(page 145) or
(page 145) or
Manual).