Paper Width (Pagwid); Left-Hand Area (Leftzon) - Tally Dascom LA2810 User Manual

User Guide
Paper width (Pagewid)
This parameter determines the actual paper width.
Head up Pagewid
Back Next
1 2 3
Pagewid=136/10"*
Set < > Exit
1 2 3
If Head up = On, the print head moves to the calculated center of the paper during the time the paper
is moving in the protected zone.
If Rightzo = ON (see below), the print head moves out of the perforation zone on the right as long as
the paper is being transported.
Set the printing width rather than the actual paper width.
Confirm your settings with the Set key (1)
Press the Next key (4) to access the next group of parameters.

Left-hand area (Leftzon)

If the parameter is On, the printhead moves out of the perforation zone (area) on the
left as long as the paper is being transported. The Pagewid setting has no influence
(see above).
Leftzon Rightzo
Back Next
1 2 3
Leftzon=Off
Set < > Exit
1 2 3
Confirm your settings with the Set key (1)
Press the Next key (4) to access the next group of parameters.
Online
Select the Pagewid menu (3)
4
Setup
Online
Setting options: From 20 to 136 in 1/10 inch steps
4
Setup
Default setting: 136/10 inch (136 characters at 10 characters/
inch)
Online
Select the Leftzon menu (2) (stands for left zone).
4
Setup
*
Online
Setting options: On/Off
4
Setup
Default setting: Off
The menu
69