Selecting Interface (Interf.); Interface Buffer (Buffer) - Tally Dascom LA2810 User Manual

User Guide

Selecting interface (Interf.)

Selects the interface. Printer is configured either for parallel, Ethernet or optional
serial connection or in automatic change for the parallel or the optional serial
interface (Shared).
Serial Interf.
Back Next
1 2 3
Interf.= Share*
Set < > Exit
1 2 3
Interf.=Auto: Printer switches automatically between USB, Ethernet and
optional Parallel Serial interface.
Interf.=Parallel: Printer using parallel interface only.
Interf.=Serial: Printer using serial interface only.
Confirm the setting by pressing the Set key (1). Press the Next key (4) to access
the next group of parameters.

Interface buffer (Buffer)

Selects the size of the interface buffer.
Buffer Timeout
Back Next
1 2 3
Buffer=256 KB
Set < > Exit
1 2 3
If buffer = 0 KB and the serial interface is selected, or if the setting "Share"is active, the
actual buffer size will be 512 bytes.
Confirm the setting by pressing the Set key (1). Press the Next key (4) to leave the parameter group
Interf.. Press the Next key (4) again to access the next group of parameters.
Press Interf. (3) key.
Online
4
Setup
Use the < (2) or > (3) key to select the desired setting.
Online
Setting Options: Auto, Parallel, Serial
4 Default Setting: Auto
Setup
Press Buffer (2) key.
Online
4
Setup
Use the < (2) or > (3) key to select the desired setting.
*
Online
Setting Options: 0–256 KB
4
Default Setting: 256 KB
Setup
The menu
51