Tally Dascom LA2810 User Manual page 34

User Guide
Do not tension the paper excessively to avoid tearing the perforation holes; do not allow
excessive slack since in this case the paper will bulge and there may be problems in the
feeding process.
Release the colored latch lever of the Left-
hand tractor and align the tractor so that the
first printing position on the paper matches
the X mark on the printer housing.
Lock the colored lever again.
Place fanfold paper into the left-hand tractor.
Open the colored latch lever of the right-
hand tractor and align it to the paper width.
Insert the fanfold paper into the right-hand
tractor.
Make sure that it is inserted by the same
length as on the left-hand tractor in order to
avoid any paper jam.
Close the tractor flap and lock the tractor by
turning the tractor lever to the rear.
Paper handling
27