Moving The Paper To The Tear Position - Tally Dascom LA2810 User Manual

Paper handling
Moving the paper to the
tear position
Ready Front1
M1 EPS Tear
1 2 3
The display alternates between...
Tear position
Front1
1 2 3
... and.
Ready Tear
M1 EPS Exit
3
1 2
A
Online Tear
Exit
1 2 3
30
Online
4
Setup
Online
4
Setup
4
After having torn off the paper, press the Exit (4) key. The printer
returns the paper to the first printing position.
Online
If a print job is active, the printer returns the paper automatically
4
Setup
to the next printing position.
Your printer by default moves the paper into the Tear
position once paper is loaded. If you deactivate this
feature in the printers menu (setting: Manual) you can
use the Tear key to move the paper to the Tear
position. For more information refer to
position (tear-view).
You can use the Tear key to move the paper to the tear
position. The tear edge is located at the front side of
the paper output opening.
Make sure that the printer is in online (Ready) mode. If
necessary, press the Online key.
Press the Tear (4) key. The printer moves the
perforation edge of the fanfold paper to the tear edge.
The tear is located at the front side of the paper output
opening (see below).
Tear off paper at the tear edge A.
Make sure you tear the paper off
STOP
straight, otherwise a paper jam may
occur.
User Guide
View and Tear