Terminating Hex-Dump; Paper Sensor Display - Tally Dascom LA2810 User Manual

Advanced menu

Terminating Hex-Dump

Hex-Dump mode can only be terminated by switching off the printer.
If you want to stop the Hex-Dump printout before switching off the printer,
press the key Online and then the key LF/FF (4) once.

Paper sensor display

If the keys 1 and 2 are pressed at power on and then (after releasing the keys)
key 3 is pressed within 2 seconds (the time is marked by an asterisk in the upper
right corner of the LCD display), the printer will show the paper sensor value in
millivolts on the LCD display. PE shows the value of the paper end sensor.
94
User Guide