Mv Serial Interface Control; Mv Auto Feature Control - Balluff MATRIX VISION mvBlueNAOS Technical Manual

84

1.13.15 mv Serial Interface Control

The "mv Serial Interface Control" contains features like
Feature name (acc.
(p. 121))
etc.
related to control the devices Serial Interface Control parameters. It enables the camera to be controlled via serial
interface.
The use case Working With The Serial Interface (mv Serial Interface Control) (p. 200) shows how you can work
with the serial interface control.
See also
Working With The Serial Interface (mv Serial Interface Control) (p. 200)

1.13.16 mv Auto Feature Control

The "mv Auto Feature Control" contains features like
Feature name (acc.
(p. 121))
to SFNC Property name (acc. to mvIMPACT
Acquire (p. 119))
mvSerialInterfaceMode
mvSerialInterfaceEnable
mvSerialInterfaceBaudRate
mvSerialInterfaceASCIIBuffer
mvSerialInterfaceWrite
mvSerialInterfaceRead
to SFNC Property name (acc. to mvIMPACT
Acquire (p. 119))
mvAutoFeatureAOIMode
mvAutoFeatureSensitivity
mvAutoFeatureCharacteristic
mvAutoFeatureBrightness
Tolerance
Description
States the interface mode of the se-
rial interface.
Controls whether the serial inter-
face is enabled or not.
Serial interface clock frequency.
Buffer for exchanging ASCII data
over serial interface.
Command to write data from the
serial interface.
Command to read data from the se-
rial interface.
Description
Common AutoControl AOI used
for Auto Gain Control(AGC), Auto
Exposure Control(AEC) and Auto
White Balancing.
The controllers sensitivity of bright-
ness deviations. This parameter in-
fluences the gain as well as the ex-
posure controller.
Selects the prioritization between
Auto Exposure Control(AEC) and
Auto Gain Control(AGC) controller.
The error input hysteresis width of
the controller. If the brightness er-
ror exceeds the half of the value
in positive or negative direction,
the controller restarts to control the
brightness.
MATRIX VISION GmbH