Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Balluff BVS SC 1280Z00-07-000 Series
Summary of Contents for Balluff BVS SC 1280Z00-07-000 Series
- Page 1 BVS SC-_1280Z00-07-000 SMARTCAMERA IO...
-
Page 3: Table Of Contents
Displays at the plug connectors ..............24 Cleaning....................... 24 FIRST STEPS Step 1: Establishing a network connection with the SMARTCAMERA ..25 Step 2: Turn on SMARTCAMERA ..............26 Step 3: Opening the BVS Cockpit web interface ..........26 www.balluff.com... - Page 4 BVS Cockpit STARTUP Updating software ....................27 Network topologies .................... 28 System settings ....................29 Selecting the communication interface for the process data ......29 Network settings / LAN interface ..............30 5.5.1 Network configuration via BVS Cockpit ............30 Digital I/O interface .....................
-
Page 5: User Instructions
The web-based software interface integrated in the SMARTCAMERA is described in the separate software manual (BVS Cockpit manual). Both manuals are available on the Balluff product website via www.balluff.com or via the help system of the BVS Cockpit interface. The SMARTCAMERA was developed to identify objects in automated industrial environments via optical codings (bar- code, 2D codes or plain text) and to recognize and verify characteristics of objects such as presence, contours, dimen- sions, colors and positions. -
Page 6: Actions
BVS SC-_1280Z00-70-000 SMARTCAMERA IO 1.3.2 Actions Action instructions are indicated by a preceding triangle. The result of an action is indicated by an arrow. Action instruction 1 Action result Action instruction 2 1.3.3 Numbers • Decimal numbers are shown without additional indicators (e.g. 123). •... -
Page 7: Used Technical Terms And Abbreviations
BVS Cockpit Used Technical Terms and Abbreviations Balluff Vision Solutions CMOS Complementary metal-oxide-semiconductor Discovery and basic Configuration Protocol DHCP Dynamic Host Configuration Protocol Device ID I/O port Digital input and output port EEPROM Electrical Erasable and Programmable ROM Electromagnetic compatibility... -
Page 8: Copyright
Balluff GmbH is authorized – but not obligated – to make updates or upgrades of the firmware available via the website of Balluff GmbH or in any other form. In such a case, Balluff GmbH is authorized – but not obligated – to inform you about the updates or upgrades. -
Page 9: Safety
All approvals and certifications are no longer valid in the following cases: • Components are used that are not part of the SMARTCAMERA BVS SC. • Components are used that have not been explicitly approved by Balluff. For a list of the approved components, see chapter “Accessories”. 2.2.3 Operation Before commissioning, carefully read the user's guide. -
Page 10: Disposal
If any damage or wear is found, the SMARTCAMERA must be immediately taken out of operation and se- cured against unauthorized use. Only service technicians from Balluff GmbH may repair defective devices. Intervention in the product by the operator is not permitted due to safety reasons. The SMARTCAMERA's housing may not be opened or loosened! -
Page 11: Product Description
3 Product description The Balluff SMARTCAMERA BVS SC is a camera for the acquisition and analysis of black- and white and color images. Application areas are optical identifications of codes and plain text, inspections for quality assurance and the measure- ment of objects. -
Page 12: Scope Of Delivery
• C-mount lenses (BAM LS-VS) • Screw-on filter (BAM OF-VS-002-xx-yy) • Lights (BAE LX) • Touchpanel PC (BAE-PD-VS-011-01) • Mounting accessories • Connection cables (BCC) • Power supply units NOTE Visit www.balluff.com for more information on available software and accessories. -
Page 13: Assembly
The screw connections at the rear plate have M4 threads. The maximum engagement length is 5 mm. The maximum tightening torque is 2 Nm. The lateral screw connections have an M5 thread. The maximum engagement length is 5 mm. The maximum tightening torque is 2.6 Nm. www.balluff.com... -
Page 14: Product Specification
BVS SC-_1280Z00-70-000 SMARTCAMERA IO Product specification 3.3.1 Image sensor Model variant Monochrome (CMOS) Color (CMOS) Resolution 1280 × 1024 Max. frame rate [Hz] Shutter type Global Shutter Sensor size 1/1.8" Pixel size [µm] 5,3 x 5,3 Spectral sensivity A global shutter sensor is not read line by line or column by column, but in one access. This rules out distortions with moving motifs (rolling shutter effect). -
Page 15: Operating Conditions
Risk of equipment damage The SMARTCAMERA and accessories shall be supplied by limited energy in accordance to UL 61010-1 Third Edition, Sub. Clauses 9.4 or LPS in accordance to UL 60950-1 or Class 2 in accordance to UL 1310 or UL 1585. www.balluff.com... - Page 16 BVS SC-_1280Z00-70-000 SMARTCAMERA IO Power 5-pin M12 plug, A-coded Description Function +24 V Supply voltage I/O 0 Input/output Ground I/O 1 Input/output Not used None. Pin may not be used. NOTE The digital sensor inputs correspond to the guideline concerning inputs, EN 61131‑2,Type The maximum load on any output is 100 mA.
- Page 17 Every output may be loaded with a maximum current of 100 mA. The maximum current for Common In and Common Out is 630 mA each. For a description of the interconnections, see the section “I/O”. www.balluff.com...
-
Page 18: Power
BVS SC-_1280Z00-70-000 SMARTCAMERA IO 3.4.2 Power The power plug connector supplies the SMARTCAMERA with the supply voltage and offers two I/O-24 V switching sig- nals (I/O 0 & I/O 1) for the connection with sensors, actuators or PLC. These two inputs and outputs feature a push-pull output stage. This allows using the output signal for PNP logic as well as NPN logic. -
Page 19: Lan
The LAN interface meets the Ethernet standard in accordance with IEEE 802.3-2008 (up to 1 Gigabit). This network con- nection is used to call up the web interface BVS Cockpit for the configuration. In addition, a communication channel is available to control the image analysis and to call up the generated result values. www.balluff.com... -
Page 20: I/O Light
BVS SC-_1280Z00-70-000 SMARTCAMERA IO 3.4.4 I/O light The I/O light interface provides 24 volt and two I/O signals (I/O 6 & I/O 7). These I/Os, similar to the two I/Os at the power plug connectors (see “Power” on page 16), are equipped with a push-pull output stage and a PNP input. I/O 6 &... -
Page 21: I/O
If the I/Os are configured as input, their signals are logically combined with OR. A 1 signal is recognized if a 1 signal is present either at I/O 0 of the power connection or I/O 0 of the I/O connection. www.balluff.com... - Page 22 BVS SC-_1280Z00-70-000 SMARTCAMERA IO PNP mode PNP logic is predominantly used in Europe. The output is sourcing, the input is sinking. To operate the I/O port in PNP mode, Common Out must be supplied with +24 V (19.2 to 30 V ) and Common In with 0 If I/O 0 is configured as input, it can be connected directly with the PNP output of a sensor, a PLC or similar.
- Page 23 If the error was removed, the output is again in normal operating state without a reset. It is also possible to use input and output functions at the same time. In the following example, I/O 0 is configured as out- put and I/O 1 as input. www.balluff.com...
-
Page 24: Display Elements
BVS SC-_1280Z00-70-000 SMARTCAMERA IO Display elements The operating states of the vision system, the IO-Link master as well as the LAN and fieldbus interface are displayed using LEDs. The display elements are distributed across the front and the underside of the SMARTCAMERA. 3.5.1 Displays on the front / at the plug connectors 3.5.2... -
Page 25: First Steps
Since the different subnets, on the work. other hand, are connected via switches, the communication with the SMARTCAMERA is still possible. Pertinent useful notes are located in the section “Network settings / LAN interface”. www.balluff.com... -
Page 26: Step 2: Turn On Smartcamera
More information about the configuration interface of the BVS Cockpit can be found in the software manual (BVS Cockpit manual) on the Balluff website and on the SMARTCAMERA. If there is already another SMARTCAMERA in the network, you can also connect with this SMARTCAMERA and change to any other SMARTCAMERA in the local network using this interface. -
Page 27: Startup
BVS Cockpit 5 Startup Updating software The Balluff website regularly offers new software updates. These may include error fixes, speed optimizations or added functions. NOTE To get the maximum benefit from the SMARTCAMERA it is recommended to regularly up- date the SMARTCAMERA with software updates. -
Page 28: Network Topologies
BVS SC-_1280Z00-70-000 SMARTCAMERA IO ATTENTION Risk of equipment damage Do not switch off the SMARTCAMERA during the update process. This may cause irremediable damage to the SMARTCAMERA. After a few minutes the update will be finished and the Power LED will change to green. The SMARTCAM- ERA is now ready for use. -
Page 29: System Settings
→ The pertinent protocol is described in the separate software manual ("BVS Cockpit Manual") under “Connection to the customer control system → Communication via UDP and TCP”. The communication interface is set in the System settings under Mode on the Communication tab. Available options for the selection are TCP and UDP. Port 36701 is used. www.balluff.com... -
Page 30: Network Settings / Lan Interface
BVS SC-_1280Z00-70-000 SMARTCAMERA IO Network settings / LAN interface All variants of the SMARTCAMERA feature a 1 Gbit/s LAN interface for configuring and monitoring the image analy- sis. Chapter “First steps” describes how this interface is used to establish the connection between computer and SMARTCAMERA with its fixed IP address 192.168.10.2. - Page 31 If the I/Os are configured as input, their signals are logically combined with OR. This means, a 1 signal is recognized if a 1 signal is present either at pin 2 of the power connection or pin 1 of the I/O connection. The same applies to I/O 1. www.balluff.com...
-
Page 32: Appendix
BVS SC-_1280Z00-70-000 SMARTCAMERA IO 6 Appendix Troubleshooting Table Error Cause Action No connection to Incorrect network configura- Check and implement the measures defined in the "Notes on the camera pos- tion network connections" chapter. sible Alternative access to the camera (direct connection): Disconnect the camera's power supply. - Page 33 If Windows does not prompt for the login and password times also with error code please use this command in a terminal window, replacing the 0x80070035 host name with the correct value for your camera: cmdkey.exe /add:sc-nnnnnnnnnde /U:expert /P:expert www.balluff.com...
-
Page 34: Type Code
BVS SC-_1280Z00-70-000 SMARTCAMERA IO Type code Balluff Vision Solutions SMARTCAMERA Function type M: Monochrome sensor C: Color sensor 9-12 Resolution 1280: 1280 x 1024 pixels Lights Z: No integrated lighting 14-15 Optics 00: C-mount lenses 17-18 Interface 07: IO variant (no fieldbus)