ADTRAN SMART/RG SR501n User Manual page 32

6. Modify the fields as needed.
The fields on this page are explained in the following table.
Field Name
PPP Username
PPP Password
PPPoE Service Name
Authentication
Method
Link Control Protocol
LCP Keepalive Period
LCP Retry Threshold
PPP IP Extension
Advanced DMZ
Non DMZ IP Address
Non DMZ Net Mask
Use Static IPv4
Address
Use Static IPv6
Address
Enable IPv6
Unnumbered Model
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Description
Enter the username required for authentication to the PPP server.
To use the gateway's MAC address as the user name, click the
username checkbox.
Enter the password required for authentication to the PPP server.
( Optional ) Enter a description for this service.
Select a means for authentication. Options are:
AUTO: Attempt to automatically detect handshake protocol (listed below)s.
l
PAP: Password Authentication Protocol (plaintext passwords).
l
CHAP: Challenge Handshake Authentication Protocol. (MD5 hashing scheme on pass-
l
words).
MSCHAP: Microsoft Challenge Handshake Authentication Protocol. (Microsoft encryp-
l
ted password authentication protocol).
section
The frequency with which the keepalive packet is sent by the gateway to the PPP server.
Enter the number of additional attempted packets that the gateway will send (in the
event that the PPP server does not respond to the keepalive) before giving up and declar-
ing the connection as Failed.
Select whether to forward all traffic to the advanced DMZ IP specified in the next field.
When you select this option, the NAT fields are hidden.
(Available only when PPP IP Extension
which PPPoE traffic is forwarded.
If using the Advanced DMZ feature, you can enter a specific vendor ID that will be broad-
cast for the DHCP server to accept the device, e.g., 192.168.2.1.
If using the Advanced DMZ feature, you can enter a secondary LAN IP address for the gate-
way. The default is 255.255.255.0 .
Click the checkbox and then specify the IPv4 Address to apply for this WAN service.
Click the checkbox and then specify the IPv6 Address to apply for this WAN service.
( Available only when IPv4&IPv6 (Dual Stack) is selected for the
Select to allow your gateway to process IP packets without configuring a unique IP address.
This works by "borrowing" an IP address from another interface.
Use base MAC address as
is selected) Specify the IP address and mask to
Internet Protocol field )
31