ADTRAN SMART/RG SR501n User Manual page 93

Field Name
IPSec Connection Name
NAT Transversal
IP Version
Tunnel Mode
WAN Interface
Remote Security Gateway
LAN-side VPN
IP Address
Mask or Prefix Length
Local ID Type
Remote-side VPN
IP Address
Mask or Prefix Length
Remote ID Type
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Description
Enter a descriptive name for this connection.
Click to enable the NAT traversal protocol.
Select the IP version associated with your infrastructure. Options are IPv4 and
IPv6.
Select the encapsulation method to be used. Options are:
AH: Use this mode to encapsulate a packet with AH and IP headers. For
l
authentication, the entire packet is signed.
ESP: Use this mode to encapsulate a packet with ESP and IP headers. An
l
ESP trailer is added to the packet for authentication and integrity.
Select the WAN connection to be associated with this tunnel.
Enter the WAN IP for this tunnel.
To allow anonymous connections, click the
Select whether to allow access to the entire LAN or a single host for local IP
addresses. Options are:
Subnet: Allows access to the entire LAN.
l
Single Address: For single host, select this option.
l
Enter the IP address used for local access.
Enter the subnet mask or prefix length for IP address entered for local access.
The default is 255.255.255.0 .
Select the type of ID for the local VPN. Options are Default, Domain, and E-Mail.
The default is Default.
When you select Domain or E-Mail, enter the domain name or email address in
the ID Content field.
Select whether to allow access to the entire LAN or a single host for remote IP
addresses. Options are:
Subnet: Allows access to the entire LAN.
l
Single Address: Allows access to a single host.
l
Enter the IP address used for remote access.
Enter the subnet mask or prefix length for IP address entered for remote access.
The default is 255.255.255.0 .
Select the type of ID for the remote VPN. Options are Default, Domain, and E-
Mail. The default is Default.
Anonymous checkbox.
92