QoS Classification
On this page, you can create traffic class rules for classifying the ingress traffic into a priority queue. You can also mark the DSCP or
Ethernet priority of the packet.
1. In the left navigation bar, click
page appears. A maximum of 32 entries can be configured.
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Advanced Setup
>
Quality Of Service
>
QoS Classification
and then click Add. The following
70