ADTRAN SMART/RG SR501n User Manual page 48

4. Modify the other fields as needed, using the information in the following table.
Field Name
Allow as IGMP Multicast
Source
Allow as MLD Multicast
Source
Enter Service Descrip-
tion
Enter 802.1P Priority
Enter 802.1Q VLAN ID
Select VLAN TPID
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Description
Select to enable this service to act as an IGMP multicast source.
Select to enable this service to act as an MLD multicast source.
(Optional) Enter a name to describe this configuration.
Options are 0 - 7. The default is -1 (disabled).
For tagged service, enter values in this field and the
For untagged service, accept the default of -1 in this field and in the
field.
Options are 0 - 4094. The default is -1 (disabled).
For tagged service, enter values in this field and the
For untagged service, enter -1 (disabled) in this field and in the
( Optional ) Select the TPID for this VLAN. Options are 0x8100 , 0x88A8 , and 0x9100 .
802.1Q VLAN ID field.
802.1Q VLAN ID
802.1P Priority field.
802.1P Priority field.
47