Table of Contents
Advertisement
Diagnostics
in this section, you can run line performance tests. Three legs of the data path are included in the available tests: LAN connectivity,
DSL connectivity and Internet connectivity tests.
You can also ping a host or trace a connection.
Diagnostics
On this page, you can view information about your DSL connections.
1. In the left navigation bar, click
2. To refresh the displayed data, click
The normal test method is initiated, utilizing OAM F5 loopback cells. The table is updated with fresh diagnostic information
about connection integrity. To learn more about what is being tested and what actions to take in the event that a particular
test should fail, click the
3. To test at the VP level instead of at an individual VC connection, click
4. To test additional connections, click
vious Connection
button appears. Repeat steps 2-4 for each connection.
Ethernet OAM
On this page, you can view diagnostics regarding your VDSL PTM or Ethernet WAN connection. Fault Management is compliant with
IEEE 802.1ag for Connectivity Fault Management.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Diagnostics
> Diagnostics. The following page appears.
Test
at the bottom of the page.
Help
link at the far right of each line item.
Next
Connection. The page refreshes to show data for the next connection and the
Test With OAM
F4.
Pre-
101
Advertisement
Table of Contents
