Table of Contents
Advertisement
Field Name
Description
OUI-Serial
Select whether to use the base MAC address or the serial number of your gateway when con-
necting to the ACS. This value may display in an ACS user interface when looking at the device
details of a particular gateway.
TR-069 Client
Enable or disable the TR-069 client on the CPE. You can disable the TR-069 WAN Management Cli-
ent if no ACS is employed.
Note: If you may want to add an ACS to your infrastructure in the future, it is recommended to
leave this option enabled. When this feature is disabled, every gateway deployed with this set-
ting must be manually/locally re-configured to enable this client if needed later.
ACS URL from
Click the
DHCP
is disabled.
Inform Interval
The frequency (in seconds) with which the CPE (gateway) checks in with the ACS to sync and
exchange data. A typical production environment entails CPEs in the field informing to the ACS
once/day or every 86,400 seconds. The default is 300 seconds.
ACS URL
Enter the URL for the CPE to connect to the ACS using the CPE WAN Management Protocol. This
parameter MUST be in the form of a valid HTTP or HTTPS URL. An HTTPS URL indicates that the
ACS supports SSL. The "host" portion of this URL is used by the CPE for validating the certificate
from the ACS when using certificatebased authentication.
You can include a port specification suffix if your ACS platform requires it, e.g., http://-
customer.acs.wanmanagmentservices.com:30005 where 30005 is the port number. The default
port is 30005.
ACS User Name
Enter the user name by which this gateway logs in to the ACS. The default username is typically
admin.
ACS Password
Enter the password to authenticate the above user name. The default password is typically
admin.
TR-069 Client
Enter the TR-069 port number.
Port
WAN Interface
Select any WAN, LAN, Loop back or a configured connection to declare how this gateway will con-
used by TR-069
nect to the ACS. The default is Any_WAN - IPv4.
client
4. (Optional) You can configure the gatway's client Connection Request mechanism which is used by your ACS for communication
with subscriber gateways.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Serial
Number: Select for SmartRG gateways using firmware version 2.5.0.2 and above.
l
MAC: This is the most typical scenario. This is the default. For firmware versions prior to
l
2.5.0.2, MAC is the only available option.
Enabled
checkbox to enable your gateway to obtain the ACS URL via DHCP. The default
112
Advertisement
Table of Contents
